Cross Contamination When Loading Vehicles

Cross Contamination

Range of Risk
Some products may contaminate other products. The seriousness may range from tainting through to health and safety threatening contamination.

Examples
An example of tainting is where a product giving off a pungent aroma may transfer some of this aroma onto another product. For instance, it would be bad practice to have perfumes loaded near to fresh apples.

An example of health and safety threatening contamination is where two chemicals that are prone to evaporation and that may be harmless individually, may result in a poisonous or potentially explosive atmosphere when their vapors are mixed.

Technical Information
Those responsible for planning vehicle loading will be given (or will acquire) technical information on which products should be separated, and the level and nature of the product separation.

Types of Separation
Products may be separated in a number of ways, such as:

Separate distribution cases (secondary packages)
Separate pallets/roll pallets/dollies/slip sheets (tertiary packages)
Separate bulk heads
Separate vehicles

Tolerances
Information should also be available about any tolerances that should be observed. Some products may need to be separated as an ideal requirement. This may be because the consequences of contamination are insignificant and have no effect on health and safety. For other products there may be a strict stipulation that they must be separated. This may be because contamination is likely and/or that contamination may result in a significant degradation of the product or that health and safety may be compromised

Fuel Efficiency | Vehicle Loading | Monitoring Performance

Planning | Types of Distribution | Legal Requirements in Commercial Transport

ABOUT DISTRIBUTION AND LOGISTICS